Quick Start Guide
Page 29
Settings
Prodigy ONE has some factory settings accessible with a pin code. These are not
user adjustable settings and would only be accessed by the installer or someone
reconfiguring Prodigy ONE in a second installation. This section is also used when
adding any UART devices to Prodigy ONE (see page 34 for more details).
System
In the System menu icon, Prodigy ONE has a setting for the Navigation program
launch and a firmware update utility.
Auto Run Navigation Launch
Prodigy ONE is default configured to launch into Navigation mode each time it turns
on. This is so that, when you access Prodigy ONE screens, the Navigation application
is already running and ready to go. Most installations that utilize a Prodigy ONE
will have this as the primary application, so Directus engineers made it easy
to access. If you wish to have Prodigy ONE boot to the main menu screen
instead of directly into Navigation, you can simply select the System menu icon
and choose “Auto Run Navi Off” .
Firmware Update
If there is a firmware update necessary for your Prodigy ONE system, you will have to contact the Directus
technical support department for specific instruction on how to acquire the necessary update and how to load it
into Prodigy ONE from this menu.
There are no user adjustable settings or configurations in this menu
item. Configurations are completed by the installer at the time of
Prodigy ONE installation or at the factory.
If you wish to have Prodigy ONE boot to the main menu screen instead of directly
into Navigation, you can simply select the System menu icon and choose “Auto
Run Navi Off” as shown in this example .
