Dionex ASE 150, Operator'S Manual

Page: 103 / 176

5 • Service
Doc. 065207-02 9/08
95
7. Slide the piston ferrule onto
the piston holder at the end
of the cylinder.
8. Replace the two mounting screws in the valve body and screw them
loosely into the valve body to secure the body to the base plate. Do
not fully tighten the screws yet.
9. Slide the spacer tool
(P/N 068118) between the
valve body and the piston
ferrule.
10. Screw the push screw tool
(P/N 068119) into the
opening in the end of the
alignment tool
(P/N 068117).
Piston
Holder
Piston Ferrule
Spacer Tool
Alignment Tool
Push Screw Tool