Dionex ASE 150, Operator'S Manual

Page: 137 / 176

C • User Interface
Doc. 065207-02 9/08
129
C.1.4 Method Editor Screen
Use the
METHOD EDITOR
screen to define the parameters in a custom
method. When a preprogrammed method is selected, the method
parameters cannot be edited. All parameters do not fit on one screen. To
view additional parameters, press the down arrow button.
BYPASS HEAT-UP Specifies whether to bypass the heat-up period for the
sample cell. The default setting (
OFF
) is recommended.
KEY SOUND
Turns on and off the beep that sounds when a keypad
button is pushed.
ERROR SOUND Turns on and off the beep that sounds when an error
occurs.
Figure C-5. Method Editor Screen (All Parameters Shown)
Parameter Description
METHOD Displays the number (1 through 24) or name of the
method currently selected for editing. See
Section 2.5
for the names and descriptions of the preprogrammed
methods.
TEMPERATURE Specifies the temperature at which the sample cell is
heated (Off, 40 to 200 °C).
STATIC TIME Static (extraction) time—the number of minutes (0 to
99) to maintain the cell contents (sample and solvent) at
the temperature set point.
Parameter Description
Press the down
arrow button to
scroll through the
list of parameters.
TEMPERATURE
METHOD
STATIC TIME
60%
5MIN
100C
1
RINSE VOLUME
PURGE TIME
100SEC
1
SST
STATIC CYCLE
CELL TYPE
1
SAVE