3590EKR, 3590EXP, 3590EXT series indicator
E-AF08_02_13.07_EN_U
35
WHEEL WEIGH TOTALISATION
- Programmable printout -
After the totalisation of a vehicle is made with the F6 key, the printing of the linked format is carried out.
With APPROVED instrument:
-
the INPUT weigh functions with a minimum weight of 20 divisions and reactivates according to how the
F.ModE >> rEACt
“REACTIVATIONS” parameter of the TECHNICAL SET-UP has been programmed
(TECH.MAN.REF.)
, in other words the
weight movement or passage by zero of the weight.
With NON APPROVED instrument:
-
the INPUT weigh functions with a weight greater than zero and reactivates according to how the
F.ModE >> rEACt
“REACTIVATIONS” parameter of the TECHNICAL SET-UP
(TECH.MAN.REF.)
has been programmed.
AXLE WEIGH TOTALISATION
- Programmable printout -
After a totalisation of a vehicle made with the
F6
key, the printing of the linked format is executed.
See “WHEEL WEIGH TOTALISATION” format for the functioning details with APPROVED or NON APPROVED instrument.
AXLE WEIGH TOTALISATION HEADING
- Programmable printout -
If a format is linked to the "AXLE WEIGH TOTALISATION HEADING" function, the beginning of the axle weighing
procedure, executed with the
F6
key, will cause the printing of this format and then the format linked to the "AXLE WEIGH
TOTALISATION" function.
VEHICLE END PARTIAL TOTAL
- Programmable printout –
If a format is linked to the "VEHICLE END PARTIAL TOTAL" function, this format will be printed at the end of the of
weighing a vehicle.
LIST OF WEIGHS
- Programmable printout -
To carry out this function, press the
2ndF
and
F6
keys. The 3 linked formats are printed, in other words, the printing of
all
the weighs’ list. To clear the weighs’ list one must reset the total general, link the 409 code to the desired key,
TECH.MAN.REF.
. The indicator shows the message
“SurE?” on the LED display and the ZEROS TOTAL text on the LCD
display; confirm with
ENTER
to clear the list of all the weighs.
NOTE:
The indicator keeps the
LAST
3500 totalisations in storage.
PARTIAL TOTAL
- Programmable printout -
Through function
405
, combinable with the desired key (
<< F.KEYS >>
step,
TECH.MAN.REF.
), the resetting of the
PARTIAL TOTAL and the printing of the linked format are made.
Alternatively, it’s possible to automatically execute the function, as described in section “ENTRY OF AXLE NUMBER FOR
AUTOMATIC PRINTING OF PARTIAL TOTAL”.
GENERAL TOTAL
- Programmable printout -
By pressing the
F9
key the resetting of the GENERAL TOTAL and the printing of the linked format are made.
GRAND TOTAL
- Programmable printout -
By pressing the
F10
key the resetting of the GRAND TOTAL and the printing of the linked format are made.
START-UP PRINTOUT
- Programmable printout -
When turning on the indicator, the printout of this format is made; this function can be used, for example, to unlock the
pincers of the TM295 printer (when this last is turned on the pincers are always locked).
CALCULATOR RESULT
- Programmable printout -
Once terminated the operation with the “CALCULATOR” function, this format is printed. See section “CALCULATOR”.
