Dini Argeo 3590EKR Series User Manual Download Page 21

Page: 21 / 48

3590EKR, 3590EXP, 3590EXT series indicator

E-AF08_02_13.07_EN_U

4.2.5 CUSTOMIZABLE DISPLAY

It’s possible to customize the data displayed on the LCD display, through the print format 99 (see

the

section

“DISPLAY

CUSTOMIZATION”,

TECH.MAN.REF.

), by using the DiniTools

™

software.

By pressing in sequence the

and

keys, it’s possible to activate the customized visualization.

The default configuration for this visualization is the following one:

If more than 4 lines have been programmed, it’s possible to scroll the visualizations by pressing in sequence the

and

keys.
Once that this visualization has been selected, press in sequence the

2ndF

and

keys to display again the visualisations

described in the previous section.

5. SCALES MANAGEMENT

At start-up, the indicator is active on the “SUM” function, in other words, the LED display shows the weight sum of all active
scales and the LCD display shows the weight of each active scale.

5.1 SET THE NUMBER OF ACTIVE SCALES

Press the

2ndF

and the

keys,

in order to set the number of active scales that are being weighed.

5.2 SET THE ACTIVE SCALES NUMBER

In order for the LED display the active scales

Per selezionare quali bilance visualizzare sul display LCD digitare da tastiera alfanumerica

313

seguita dal tasto

- Il display LCD visualizzerà

- Inserire i numeri delle bilance che si vuole visualizzare e confermare con il tasto

ENTER

5.3 SELECTION OF SINGLE SCALE/SUM FUNCTION

In order for the LED display to show the current weight on the single scale, or the sum function, press

the

2ndF

key

followed by a key from 0 to 8:

>> “SUM” function.

>> Selection of scale number 1.

>> Selection of scale number 2.

>> Selection of scale number 3.

>> Selection of scale number 4.

>> Selection of scale number 5.

>> Selection of scale number 6.

>> Selection of scale number 7.

>> Selection of scale number 8.

For example with the

2ndF

and the

keys, the words “SCALE 1” appear on the LED display for a few seconds followed by

the value of the Weight on the selected weighing machine.

first description of the selected article

contents of the input text 0

contents of the input text 1

ITM. : ARTICLE 1

TXT0: TRUCK 1

TXT1: TRAILER 1

313 CHG.SCA

0001

Summary of Contents for 3590EKR Series

















































Search results

Summary of Contents for 3590EKR Series

Reviews:

Brands by name

Popular brands

Dini Argeo 3590EKR Series, User Manual

Search results

Summary of Contents for 3590EKR Series

Reviews:

Brands by name

Popular brands