3590EKR, 3590EXP, 3590EXT series indicator
E-AF08_02_13.07_EN_U
14
4.1.5 INDICATOR CONNECTED TO PC KEYBOARD
It’s possible to connect a PC keyboard (optional), used to emulate the functions of the keys of the indicator.
The keys are managed in the following way:
KEYBOARD
KEY OR FUNCTION EMULATED
Esc
-
C
key.
- If pressed at start-up, it allows entering in the technical set-up.
In the alphanumeric input, it deletes all entered characters.
and Canc
-
C
key.
- If pressed at start-up, it allows entering in the technical set-up.
In the alphanumeric input, it cancels first the characters which follow the cursor, then the ones which
precede it, one at a time.
Enter
-
Fn
key.
- Confirms the entered value.
- Enters the displayed step.
Numeric and
alphanumeric
keys, SHIFT and
CAPS LOCK
- Quick entry of a numeric and alphanumeric string: through the CAPS/LOCK or SHIFT key it is possible
to switch from the capital letters to the lower case letters, and vice versa, or enter the second character
corresponding to the key (for example ", %, &, /, ? ). The entered string is shown on the LCD display.
Cursor keys
- Scroll the parameters.
- Increase or decrease the blinking digit while entering a value.
Cursor keys
- When entering a value or an alphanumeric string, it scrolls the digits to the right or to the left.
F1, F2….F10 F1,F2….F10 keys.
F11
2ndF
key.
F12
TARE
key.
The PC keyboard also allows to enter a numeric or alphanumeric string (max.32 characters) and then press a key to
execute the corresponding quick function.
For example, if the function 122 (input text 1 configuration) is combined to the F4 key (see
<< F.KEYS >>
step,
TECH.MAN.REF.
), through PC keyboard it’s possible to enter a text and the press F4 to quickly modify the input text 1.
NOTE:
through the remote keyboard, it’s not possible to carry out the functions made by pressing the keys at length.
4.1.6 REMOTE CONTROL
Depending on the model of indicator, it is possible to remotely control the instrument through one of the following types of
remote controls: 19-key infrared (ir), 18-key infrared (ir) or 6-key radio (rd).
The type of remote control to be used must be selected in the Setup environment, in the
<< inF.rEd >>
step
(TECH.MAN.REF.)
.
NOTE: The infrared remote controls are for indoor use only.
