3590EKR, 3590EXP, 3590EXT series indicator
E-AF08_02_13.07_EN_U
10
3.4 TURNING OFF THE INSTRUMENT
TO TURN OFF
the instrument keep the C key pressed until the “- OFF -“ message appears on the LED display and “ ***
POWER OFF *** ” on the LCD display.
3.5 TURNING ON PRINTER IN ENERGY SAVING MODE
Premise:
the
SEtuP >> SEriAL >> CoMPrn >> PWrPrn
parameter must be set as
“EXtoFF”
or
“PWrint”
(TECH.MAN.REF.)
.
In a system where the indicator is connected to a printer, both are battery powered, the printer is normally maintained in
STAND-BY and powered only when a printout is needed. This function reduces the energy absorbed by the battery when
the printer is not being used.
If, in this configuration, one should power the printer to change the paper and other maintenance jobs, one needs to press
the
ENTER
and
0
keys one after the other, during the weighing: the LED display shows “Prn – on”, and the printer is kept
on. Press any key to exit from this condition.
4. FRONT PANEL KEYS AND DISPLAYS
4.1 FUNCTION OF THE KEYS
In the following section, and later on in the manual, the keys’ functioning is described in accordance to how these are
configured by factory.
It is possible to customise the functionality of the keys through the <
< F.KEYS >>
step.
C/DEL
- Turns the instrument on/off.
- If pressed for an instant, it clears the tare value.
- Exits the parameter without confirming and saving the modifications.
- In the numeric input phase, it quickly clears the present value.
TARE/ZERO
- If pressed for an instant it carries out the tare function.
See section “TARE FUNCTIONS”, for the specific tare function, depending on the selected
totalisation type (wheel weighing/axle weighing).
- If pressed at length, when viewing one scale, it clears the relative gross weight, if it’s within the
percentage configured in the
<< 0.PErC >>
step.
Fn/ENTER
- In the alphanumeric input phase, it confirms the entry made.
- In the menu it allows to enter a step or to confirm a parameter inside a step.
