3590EKR, 3590EXP, 3590EXT series indicator
E-AF08_02_13.07_EN_U
31
EXAMPLE
: to calculate the barycentre of a 4-wheel vehicle with a weighing system having the scales arranged as shown in
the figure below, one must position the vehicle on the scales, press the
F2
key and enter the following parameters:
Y
1
15
19
18
17
16
15
14
13
5
9
7
6
2
8
12
1
11
10
9
8
7
6
5
3
0
2
4
3
0
4
10
11
12
13 14
16
(INTER AXLE)
SCALE 1
SCALE 2
SCALE 3
SCALE 4
X
(TRACK GAUGE)
SCALE 1:
X.WhEL.1:
000,00
Y.WhEL.1:
000,00
SCALE 2:
X.WhEL.2:
000,00
Y.WhEL.2:
015,00
SCALE 3:
X.WhEL.3:
013,00
Y.WhEL.3:
015,00
SCALE 4:
X.WhEL.4:
013,00
Y.WhEL.4:
000,00
13.3 “AXLE WEIGH” TOTALISATION TYPE
To carry out the weighing of a vehicle in the “axle weigh” mode, carry out the following operations:
1)
Carry out a cycle of zero
2)
Put the first axle of the vehicle onto the scales
3)
Press
F6
: the weight of the vehicle is totalized, and if enabled, the weight data of the single scales and the total
vehicle is printed.
4)
Take the vehicle off the scales
5)
Put the next axle onto the scales
6)
Press
F6
: the weight of the next axle is totalized and if enabled, the configured weight data of the single scales and
the vehicle total is printed.
7)
Take the vehicle off the scales
