Digital Projection Mercury HD, User Manual

Page: 85 / 110

8-19
Digital Projection
MERCURY HD
8. Using the On-Screen Menus
Link Mode Status Page
Displaying Current Status of Link Mode
When selecting the tab "Status", you will get the following
dialog box.
Master I D ................. Indicates the Master projector
Status ....................... Indicates the status of the master
projector
Connected PJ ........... Indicates number of connected slave
projectors
Slave No ................... Indicates serial number of the slave
projector
I D ............................. Indicates I D of a slave projector
Status ....................... Indicates the status of the slave
projector
Reconnect button .... Confirms connection of all linked
projectors
Status items
Running .................... The projector is now working
Cooling Lamp ........... The fan is now cooling the lamp
Standby .................... The projector is in stand-by or idle.
Communication Error .... A communication error has occurred
Connecting ............... The projector is now verifying for
connection
Error Standby ........... An error caused the projector to enter
the stand-by mode.
LAN Mode
This feature allows you to set various setting items when the
projector is used on your network.
Consult with your network administrator about these settings.
NOTE:
• Connect an Ethernet LAN cable to the LAN port (RJ-45) of the
projector for network connection.
• Digital Projection's optional wireless LAN card is available. For more
information on inserting or ejecting a LAN card, see page 5-2.
• Either PC Card Slots 1 or 2 can accept LAN card. If two LAN cards
are inserted into both PC card slots, the first inserted one is effective.
• The standard built-in LAN feature and a commercially LAN card are
available for network connection, but only one can be used at a time
(mutual exclusion).
CAUTION: Make sure that the LAN card is removed during
Standby mode (NOT Idle mode)or with the main power
off.Failure to do so may cause damage to the LAN card,or
may cause the projector to malfunction.Should a malfunction
occur, turn off the main power and turn it back on.
LAN Mode Status Page
LAN Card
This option selects to use either LAN feature between the
standard LAN port (RJ-45) and an optional LAN card
inserted in the PC CARD slot.
Projector Name
Specify a unique projector name. Press to display the
software keyboard and type in. Up to 16 alphanumeric
characters can be used.
IP Address ............... Indicates the IP address of the
projector.
Subnet Mask ............ Indicates the subnet mask of the
projector.
Gateway .................. Indicates the gateway of network
connected to the projector.
MAC Address .......... Indicates the MAC address of the LAN
card.
Advanced ................ Displays the IP Address setting
window.
Reconnect ............... Use this button to connect the
projector to a network.
NOTE: Once you have selected "OK" on the Advanced screen, you
cannot cancel the changes using "Cancel" on the LAN Mode screen.