Digital Projection Mercury HD, User Manual

Page: 73 / 110

8-7
Digital Projection
MERCURY HD
8. Using the On-Screen Menus
Entering Alphanumeric Characters by Using the
Menu
Alphabet or numeric characters are used for your IP address
or projector name. To enter IP Address or projector name, use
the software keyboard.
For using the software keyboard, see page 10-10.
Entering Alphanumeric Characters by Using the
Remote Control Numeric Buttons
Input alphanumeric characters by selecting one character at
a time with the numeric (Source/Input) buttons 1through 10(0)
and by moving the cursor with the SELECT button. After
finishing the selection of the characters, press the ENTER
button.
Whenever one of the Source/Input buttons on the remote
control is pressed, characters will be rotated.
For example: A → B → C → 1 → A → ...
NOTE: When holding and pressing the CTL button and pressing one of
the Source/Input buttons, another group of characters will be rotated.
For example: a
→
b
→
c
→
!
→
a
→
...
The alphanumeric characters corresponding to these Source/
Input buttons are as follows:
Numeric buttons Press Press with CTL
1 A
→
B
→
C
→
1 a
→
b
→
c
→
!
2 D
→
E
→
F
→
2 d
→
e
→
f
→
”
3 G → H → I → 3 g → h → i → #
4 J
→
K
→
L
→
4 j
→
k
→
l
→
$
5 M → N → O → 5 m → n → o → %
6 P
→
Q
→
R
→
6 p
→
q
→
r
→
&
7 S
→
T
→
U
→
7 s
→
t
→
u
→
'
8 V → W → X → 8 v → w → x → (
9 Y
→
Z
→
/
→
9 y
→
z
→
?
→
)
0 * → , → . → 0 ; → : → + → -
* If you have made an error in the input of a character, use
the SELECT button and enter the correct letter or number.
NOTE: Only numbers can be entered when you use the remote control
Source/Input buttons while displaying the Software Keyboard.
4
Menu Descriptions & Functions
Source Select
Enables you to select a video source such as a VCR, DVD
player, laser disc player, computer or document camera
depending on what is connected to your inputs.
Press the up/down buttons on your remote control or the
projector cabinet to highlight the menu for the item you want
to project.
* RGB1,2 * Viewer
* DVI DIGITAL * LAN
* Video * RGB 1 (Video)
* S-Video * RGB 1 (S-Video)
Entry List
Displays the list of the entry signals. Use the SELECT
buttons on your remote control or the projector cabinet to
select the signal and press the ENTER button on the remote
control or the projector cabinet to display the Entry Edit
Command screen.
Using the Entry List
Making any adjustments to the current picture will
automatically register its adjustments to the Entry List. The
registered signal can be loaded any time from the Entry List.
NOTE: Up to 100 presets can be registered.
Entry Edit Command
You can edit signals on the Entry List.
Load ............ Enables you to select a signal from the list.
NOTE: This can be done by pressing CTL and ENTER buttons.
Store ............ Enables you to store the currently projected
signal.
NOTE: This can be done by pressing CTL and ENTRY LIST buttons.
Cut ............... Enables you to remove a selected signal from
the list and place it on the "clipboard" in the
projector.
Copy .............. Enables you to copy a selected signal from
the list and place it on the "clipboard" in the
projector.
Paste ........... Enables you to paste the signal placed on the
"clipboard" to any other line of the list. To do
this, select "Paste" and then select the line
number you want to paste to. Last press
ENTER.