Digital Projection Mercury HD, User Manual

Page: 14 / 110

1-6
1. Introduction Digital Projection
MERCURY HD
Control Panel Features
1. POWER Button (ON / STAND BY)( )
Use this button to turn the power on and off when the main
power is supplied and the projector is in standby mode or
idle mode.
NOTE: To turn on or off the projector, press and hold this button for a
minimum of two seconds.
2. POWER Indicator
When this indicator is green, the projector is on; when this
indicator is orange, it is in standby or idle mode. See the
Power Indicator section on page 10-3 for more details.
3. STATUS Indicator
If this light blinks red rapidly, it indicates that an error has
occurred, the lamp cover is not attached properly or the
projector has overheated. If this light remains orange, it
indicates that you have pressed a cabinet key while the
Control Panel Key Lock is enabled. See the Status Indicator
section on page 10-3 for more details.
4. LAMP Indicator 1/2
If this light blinks red rapidly, it's warning you that the lamp
has reached the end of its usable life. After this light
appears, replace the lamp as soon as possible (See page
9-2). See the Lamp Indicator section on page 10-3 for more
details.
5. PC CARD Access Indicator 1/2
Lights while accessing a PC card.
6. 3D REFORM Button
Press this button to enter 3D Reform mode to correct the
keystone (trapezoidal) distortion, and make the image
square. Press to toggle between Cornerstone and Keystone
adjustment mode.
NOTE: Pressing and holding this button for a minimum of 2 seconds
will reset 3D Reform correction setting values to zero.
7. AUTO ADJUST Button
Use this button to adjust Position-H/V and Pixel Clock/Phase
for an optimal picture. See page 3-6.
8. MENU Button
Displays the menu.
9. SELECT (+) (–) / Volume Buttons
: Use these buttons to select the menu of the item you
wish to adjust. When no menus appear, these buttons
work as a volume control.
: Use these buttons to change the level of a selected
menu item. A press of the button executes the
selection. When the menus or the Viewer tool bar is
not displayed, these buttons can be used to select a
slide, or to move the cursor in Folder List or Slide List.
10. ENTER Button
Executes your menu selection and activates items selected
from the menu.
11. CANCEL Button
Press this button to exit "Menus". Press this button to return
the adjustments to the last condition while you are in the
adjustment or setting menu.
12. LENS SHIFT Button
Adjust the lens offset by shifting the projected image position
horizontally and / or vertically.
13. ZOOM Button (+/-)
Zoom the lens in and out.
14. FOCUS Button (+/-)
Adjust the lens focus.
8
2 3
7
5
6
4 1
9
10
11
12 13
14