After the cartridge is loaded, you cannot remove it without rewinding and
uncoupling the leaders, a process called unloading. Even if you do not use the
tape, you must unload it before you can remove the cartridge. After you press the
Unload button, the tape rewinds into the cartridge and the leaders uncouple.
3.1.3.2 Labeling a Tape Cartridge
After recording data in a cartridge, label its contents. A slot for the label is on
the front of the cartridge. Write the identification on the label and insert the
label in the slot.
Label Slot
MLO-000960
The label is visible when the tape is in the drive.
To indicate that the tape was recorded on a TK70 tape drive, check the box
labeled 296MB. Use the 95MB box for tapes recorded on a TK50 drive.
CAUTION
Do not write on the cartridge or attach labels to its top, bottom, or sides.
3–26 Operating the System Options
