3.1.1.3 Changing the Bus Node ID Plugs
Spare bus node ID plugs are supplied with your system. Use them to renumber
your ISEs:
• If you reconfigure your system with an expander
• If you create a DSSI VAXcluster configuration
The ID plugs have prongs on the back that indicate the bus node number (unit
number) of the ISE.
• To remove a plug, grasp it firmly and pull straight out.
• To insert a plug, align the two center prongs with the two center slots and
press the plug into the slots.
MLO-004045
Bus Node
ID Plug
Operating the System Options 3–9
