Figure 4
Figure 5
right
left
Figure 2
Figure 3
1
2
3
4
1
2
3
4
Figure 1
1
2
3
DEC Field Service Instruction
7-58
7-59
Part:
Kit ASF Lever 2
Part No.: 5112 292 6875x
DEC P/N.:
FD-W0487-01
REMOVAL of the Force Adjustment Levers
(Figure 2)
"
Remove the ASF-Cassette from the printer and remove any paper loaded,
and the paper support (if mounted).
Y
M
Remove the lever-side cover of the ASF Cassette by releasing of the
four snaplocks (No. 1 - 4 in figure 1). Use a flat screw driver to do
so and keep the sequence of figure 1.
Y
M
Remove the circlip (No. 4 in figure 2) of the lever bar.
Y
M
Slide out the bar to the direction of the connector and snap the
lever out of the encasing.
REASSEMBLING of the Force Adjustment Levers
(Figure 2)
Y
M
Assemble the three levers together (figure 3). Lever 2 (upper paper
release) onto lever 1 (paper pressure lever), and lever 3 (lower
paper release) onto lever 2. Observe that the little plug of lever 2 is
fitted in the hole provided in lever 3.
Y
M
Execute now the REMOVAL procedure in reverse sequence.
REMOVAL of the Locking Levers
(Figure 5)
Y
M
Remove the ASF-Cassette from the printer and remove any paper
loaded, and the paper support (if mounted).
Y
M
Remove both side covers of the ASF Cassette by releasing of each
snaplocks (No. 1 - 4 in figure 1).
Y
M
Slide out the bar to the direction of the connector and release both
paper guides to exchange the locking levers.
REASSEMBLING of the Locking Lever
(Figure 5)
Y
M
Insert the left and right locking lever into the paper guides.
Y
M
Push the bar through the locking levers, the paper guides, and the
support springs under neath the paper guides. Take care, that all
parts are properly adjusted.
Y
M
Execute now the REMOVAL procedure in reverse sequence.
5112 991 15071
