1
2
1
2
DEC Field Service Instruction
8-4
8-5
Part:
Platen Assembly
Part No.: 5112 292 3801x
Y
M
Move print head from its right hand position into the centre.
DEC P/N.:
LA60X-PN
Y
M
Fit the gear wheel end of the platen into the right hand side mounting.
To Remove the Platen
(2)
the platen into its mounting and lock in position by pushing the tag on
"
Switch the printer OFF.
"
Install the ribbon cassette.
"
Lift and remove the output stacker.
"
Fit and close the top cover.
"
Lift and remove the top cover.
"
Fit the output stacker.
"
Remove the Ribbon cassette.
Y
M
Position the print head to the very right.
Y
M
Release the plastic platen clamp (1) on the left platen mounting.
Y
M
Move platen (2) approximately 10 mm to the left, lift the left end of the
platen free of its mounting and withdraw the platen from the right
mounting.
Y
M
Lift the platen to the left underneath the print head and take it out.
5112 991 10352
PM AGC:
(s. User's Manual, Chapter 2)
Run the MENU-function AGC ADJUST with ink ribbon cassette installed
but no paper inserted
To install the Platen Assy
(2)
L
Ensure that the printer is switched OFF.
Y
M
Place platen (2) in the vacant space between print head and metal bar.
Be careful not to damage the gear wheel.
Y
M
Ensure that the plastic platen clamp (1) is in the upright position, push
the clamp to the rear.
