6
7
9
5
1
2
3
4
15
8
10
11
13
12
14
16
see Note!
Field Service Instruction
7-66
7-67
Part:
Rep Kit ASF-Cassette
Part No.: 5112 292 7235X
DEC P/N.: ____________
REMOVAL
"
Remove the ASF-Cassette from the printer. Remove any paper loaded and
the paper support (if mounted).
Y
M
Remove the cover (1) of the ASF-Cassette by releasing the snaplocks
(2). Use a flat screw driver to do so.
Y
M
Release the connector (3) out of the cover (1).
Y
M
Pull back the retaining parts (5) and remove the shaft (4).
Y
M
Remove the belt from the pulley (6) and remove the pulley.
Y
M
Cut the rest of the broken shaft (7) as well as the second (non broken)
shaft. Use a side nippers to do so. The remaining rest of both shafts
must not exceed 0.7 mm.
Y
M
Remove the female screw (13) and the washer (12) from the screw (11).
Y
M
Mount the metal part of the Rep. Kit ASF-Cassette (8) by inserting the
screw (11) into the hole (9).
Note:
Mount the Rep. Kit ASF-Cassette (8) in the same orientation as
shown in the figure. Lift the metal part (8) up to the highest position,
nearly to the edge (16).
Y
M
Put a washer (12) on the screw and tighten the female screw (13).
Y
M
Mount the gears (10) and (15) as shwon in the figure and fix the
gear (15) with the snap-ring (14).
REASSEMBLING
Y
M
Assemble the pulley (6) and the belt.
Y
M
Execute now the REMOVAL procedure in reverse sequence.
5112 991 15321
