3
1
2
4
5
6
DEC Field Service Instruction
7-2
7-3
Part:
Housing 405
(1)
Part No.: 5112 292 3840x
DEC P/N.:
FD-W03RF-01
Part:
Top Cover LA600
(2)
Part No.: 5112 292 6826x
DEC P/N.:
29-31800-01
Part:
Top Cover 40A
(2)
(PP 405)
Part No.: 5112 292 6827x
DEC P/N.:
FD-W03RH-01
Part:
Front Cover 405
(3)
Part No.: 5112 212 5490x
DEC P/N.:
FD-W03RC-01
Part:
Front Insertion 405
(4)
Part No.: 5112 292 3842x
DEC P/N.:
FD-W03RJ-01
Part:
Stacker Support 405
(5)
Part No.: 5112 212 5500x
DEC P/N.:
FD-W03RD-01
REMOVAL
"
Disconnect mains cable
"
Remove the manual front insertion (4)
Y
M
Remove the front cover (3) resp. the ASF cassette(s) out of the
mounting slots
Y
M
Swing the top cover (2) to its nearly upright position and remove it
Y
M
a) Remove the housing (1) by releasing the cover snap locks (6)
with a flat bladed screwdriver
b) To remove the housing (1) grasp it by the sides, raise the front
slightly, push the housing back until the metal snaps are out of
the slots at the rear of the printer and then lift the housing
REASSEMBLY
Execute the REMOVAL procedure in reverse sequence
5112 991 10786
