1
2
3
4
4
Spring
Detail B
5
1
Detail A
Horizontal Motor Cable
Stepping Motor 1.8 DEG Cable
Stepping Motor
7.5 DEG Cable
Ribbon Gear Cable
DEC Field Service Instruction
7-40
7-41
Part:
Tractor Gear
Part No.: 5112 292 3803x
DEC P/N.:
FD-W045N-01
REMOVAL
"
Disconnect mains cable
"
Remove all encasing parts (see Part:
Housing
)
"
Remove DEV-40 (see Part:
DEV-40
)
Y
M
The paper path for output must be set to tractor. By moving the
carriage to the uppermost right position the paper path will be
changed (an audible "click")
Y
M
The axle (1) must be turned to the position as shown in Detail B by
turning on the minipitch belt (2) in clockwise direction
Y
M
Remove all cables from the cable guide
Y
M
Remove the three screws (3) and remove the Tractor Gear
REASSEMBLING
"
Execute the REMOVAL procedure in reverse sequence
Note:
- Before the new can be mounted, turn the gearwheel (4) in
such a way that the bold (5) reaches the uppermost position
- Observe that the cable installation is correct (Detail A)
5112 991 10603
