Digital Equipment DIGITAL Server 7100 1200, Service Maintenance Manual

Page: 33 / 162

Server Software and Utilities
2-12
To run the diagnostics from the DOS partition, perform the following:
1. At the MS-DOS prompt, type:
C:\diag\diagnose.bat
2. After the server boots, choose MS-DOS from the boot selection.
3. Once the diagnostics begin, the main screen appears.
To create the diagnostic diskettes from the Quick Launch CD-ROM, perform the
following:
1. Insert the Quick Launch CD-ROM into the drive and boot the server or from
a PC or workstation, use Windows File Manager or Explorer and run:
<cd-rom>:\QLAUNCH.EXE.
2. From the Quick Launch main menu, select Installations & Utilities.
3. Select the Utilities tab and then select the server model.
4. Insert a blank MS-DOS formatted diskette into drive A and select
Diagnostics.
5. Select Continue. Afterwards, remove the diskette for safekeeping.
6. Choose the next diagnostic diskette from the list and then select Continue.
Create all the diskettes labeled “Diagnostics.”