Digital Equipment DIGITAL Server 7100 1200, Service Maintenance Manual

Page: 121 / 162

FRU Replacement
5-44
Removing and Replacing the CD-ROM Drive
1. Turn off the server.
2. Unlock and the remove left side panel.
3. Open the door.
4. Disconnect the power and data cables from the CD-ROM drive.
5. Remove the two screws from the drive bay.
6. Slide the drive out from the drive bay by applying pressure at the rear of the
CD-ROM drive.
7. Remove the right side bracket from the right side of the CD-ROM drive.
8. Set jumpers on the new CD-ROM drive identical to those on the removed
CD-ROM drive.
9. Replace the CD-ROM drive by performing the removal steps in reverse
order.