Digital Equipment DECagent 90, User Information

Page: 50 / 92

3. To set the service to ON, enter the following commands:
Caution
When you set the service to ON, you are turning off the network!
You must have system privileges and be knowledgeable in system
management. If you are on a production system, we recommend that
you let the system manager do this step.
ncp> set cir qna-0 state off
Return
ncp> set cir qna-0 service enabled
Return
ncp> set cir qna-0 state on
Return
4. Exit out of ncp and downline load the firmware file, denma.exe, into
mom$load by entering the following command:
$ copy denma.exe mom$load:
Return
Downline Loading the Firmware File
The downline loading is performed through the command console interface (CCI).
To access CCI, use the following procedure:
1. Connect a terminal to the front panel connector of the DECagent 90.
4–22 DECagent 90 Management