![background image](http://html.mh-extra.com/html/digital-equipment/decagent-90/decagent-90_user-information_2498486054.webp)
This could happen for any of the following reasons:
•
The load host you set up is not logically connected to the DECagent 90.
Make sure that they are on the same LAN and can communicate with
each other.
•
The load host is not properly set up. See the ULTRIX Host Node Setup
section.
•
The DECagent 90 is faulty. Call your Digital Services Engineer.
5.
To start the module you can do one of the following:
•
At CCI> console prompt, enter this command: start 200000
•
Turn the power to the module off, then turn it back on.
Trap-PDU
Traps are not supported in Version 1.0 of the DECagent 90.
4–26 DECagent 90 Management
Summary of Contents for DECagent 90
