Digital Equipment DECagent 90, User Information

Page: 19 / 92

Standalone Installation
This section provides detailed procedures for installing a DECagent 90 as a
standalone unit.
Select a location.
The DECagent 90 can be installed on a table top or mounted on a wall.
The location should be within 2 meters (6 feet) of a power outlet that supplies the
correct voltage.
Place the DECagent 90 on a table.
If you place the DECagent 90 on a table top, follow the environmental
specifications listed in Appendix A.
Mount the DECagent 90 on a wall.
To mount the DECagent 90 on a wall, use the following procedure:
1. Remove the back cover of the DECagent 90, if there is one (Figure 2–3).
a. Insert a small screwdriver into the top mounting hole on the cover.
b. Lift up on the latch with the screwdriver, then pull the cover away and
down from the top of the unit.
Installation 2–5