Digital Equipment DECagent 90, User Information

Page: 42 / 92

[1] DECbridge 90 (Work Group Bridge) [6] DECserver 90L
[2] DECrepeater 90T (Twisted Pair) [7] DECserver 90L+
[3] DECrepeater 90C (Coax) [8] DECserver 90TL
[4] DECrepeater 90A (AUI/Fiber-Optic) [9] Empty
[5] DECrepeater 90FL (Fiber-Optic)
Enter the module type:
A DECbridge 90 module must reside in slot 7 or 8.
If you choose module type [1] DECbridge 90 and you select a slot number other
than 7 or 8, then the following message appears:
The bridge must reside in either slot 7 or 8.
Since at least one of the slots in which the bridge may be placed is
currently empty, do you wish to put the bridge there? <YES>
Enter the slot number <n>:
Where n is either 7 or 8, depending on which slot is empty. Enter either 7 or 8 to
place the bridge in that slot.
Note
If only one slot is empty, you will be asked only for a module type.
If applicable, the following prompt appears:
Enter the MAC address:
The acceptable formats are as follows:
uu-vv-ww-xx-yy-zz
uu:vv:ww:xx:yy:zz
uuvvwwxxyyzz
where uu, vv, ww, xx, yy and zz are hexadecimal numbers in the range 00 through
FF.
After you respond to all of the prompts, the module is added to the community,
and the following prompt appears:
Add another module? <YES>
4–14 DECagent 90 Management