Digital Equipment DECagent 90, User Information

Page: 37 / 92

Set Agent IP Address
Option 9, Set Agent IP Address, allows you to set the IP address for the
DECagent 90. When you choose this option, the following appears:
Sets Enabled DEChub 90 SNMP Network Management Agent V1.0
Default Community: public [1] Default Slot: 1
Name: DECagent 90 IP Address: 255.255.255.255 System Uptime: 12 17:42:45
Set Agent IP Address
Enter the IP address:
Enter the IP address using the following format:
aaa.bbb.ccc.ddd
A valid value in each field is 0 to 255 decimal.
To obtain the IP address from the bootp server, enter a zero (0) at this prompt.
When the agent is powered-up, it will request the IP address from the bootp
server.
Enable/Disable SNMP Sets
Option 10, Enable/Disable SNMP Sets, allows you to enable or disable SNMP
Sets. When you choose this option, the state of the SNMP Sets is changed.
For example, if the SNMP Sets are currently enabled, choosing this option will
disable the SNMP Sets.
To determine the current state of SNMP Sets, check the upper-left corner of the
screen. If "Sets Disabled" is flashing, then SNMP Sets are currently disabled. If
SNMP Sets are enabled, "Sets Enabled" appears on the screen.
Note
The default state (factory setting) is Sets Enabled.
Change System Information
Option 11, Change System Information, allows you to set a node name for the
DECagent 90 and change system information related to the MIB-II system group
(sysName, sysLocation, and sysContact). The node name should be the same
as the <alias> in the bootp table. When you choose this option, the following
prompts appear:
DECagent 90 Management 4–9