Digital Equipment DECagent 90, User Information

Page: 34 / 92

Where n is the community index of the community you want to remove. Enter
either Yes (Y) or No (N).
If you enter Yes, then the community will be removed. If you enter No, then the
community will not be removed.
After you enter Yes or No, you will be asked if you want to remove another
community.
Note
You cannot remove the community in which the DECagent 90 resides.
Add Community Trap Addresses
Option 4, Add Community Trap Addresses, allows you to add trap addresses to
the community trap address table. The maximum number of entries is eight.
When you choose the Add Community Trap Addresses option, the following
appears:
Sets Enabled DEChub 90 SNMP Network Management Agent V1.0
Default Community: public [1] Default Slot: 1
Name: DECagent 90 IP Address: 255.255.255.255 System Uptime: 12 09:42:45
Add Community Trap Addresses:
There are no trap address set for this community.
You may enter up to 8 more trap addresses for this community.
Add trap address:
Enter the trap address using the following format:
aaa.bbb.ccc.ddd
A valid value in each field is 0 to 255 decimal.
Remove Community Trap Addresses
Option 5, Remove Community Trap Addresses, allows you to remove trap
addresses from the community trap address table. When you choose this option,
the following prompt appears:
Enter the trap address:
Enter the trap address using the following format:
aaa.bbb.ccc.ddd
4–6 DECagent 90 Management