Digital Ally, Inc.
|
Device Configuration
3-12
DVM-800 Operation Guide
|
860-00186-00 Rev L
3.7 Motion
Accelerometer
The DVM-800 has a built-in accelerometer which can be used to trigger an Event Record
when the set G-Force levels are exceeded. The accelerometer can be used to activate an
event recording based on the independent G-force levels for acceleration, braking,
cornering, collision, and vertical movements.
Accelerometer event triggers can be disabled by setting the G-force levels to zero (0) in
the configuration of the DVM. Setting the G-force level greater than zero (0) will set the
event trigger threshold. When the event trigger threshold is met or exceeded, an event
trigger will occur and the DVM will begin an event record. The accelerometer duration
parameters determine the amount of time the G-Force level must be present before
triggering an event.
Settings: Low, Normal, High,
Disabled
[default], Custom
Figure 3-13:
Accelerometer axis orientation for the DVM-800
