Digital Ally, Inc.
|
Device Configuration
3-22
DVM-800 Operation Guide
|
860-00186-00 Rev L
Max Distance
This is the distance in miles that the vehicle can travel from the home base. If the
vehicle travels beyond the specified distance, an event record will be triggered. A value
of zero (0) disables this event trigger.
Locations of Interest
Locations of Interest
are geographical areas identified by latitude, longitude and a radius
using the GPS antenna. These areas are generally considered restricted or off limits.
If the vehicle enters, or remains in a location of interest for a configurable amount of
time, the DVM will automatically start a recorded event. Up to 21 different
Locations of
Interest
can be configured.
Below are the configurable items:
Time in Location
Enter the allowable time in this location before an event recording is triggered (days,
hours and minutes). The minimum time in a location of interest before an event
is triggered is 1 minute. To disable all unauthorized zones set the time to 0 days, 0
minutes, and 0 seconds.
Latitude
Enter the location(s) latitude in an integer decimal format (i.e.; 38.89171). To disable a
location, the latitude, longitude, and radius parameters must all be zero (0)
Longitude
Enter the location(s) longitude in an integer decimal format (i.e.; -94.670956). To disable
a location, the latitude, longitude, and radius parameters must all be zero (0).
Radius (miles)
Enter the radius of the unauthorized location in miles. To disable an unauthorized
location, the latitude, longitude, and radius parameters must all be zero (0).
ONCE THE DESIRED SETTINGS HAVE BEEN ENTERED, CLICK SAVE AND PROCEED TO
THE NEXT PAGE TO ACTIVATE YOUR DVM-800 MEMORY CARD.
