Digital Ally, Inc.
|
Device Configuration
3-20
DVM-800 Operation Guide
|
860-00186-00 Rev L
3.9 Data Transfer
Network
The DVM is capable of automatically uploading event files via Wi-Fi to the VuVault
®
back office. The DVM must have the Wi-Fi adapter connected and configured for Wi-
Fi uploading. The back office network must have at minimum a wireless access point
(WAP), and a computer running FTP server software and VuVault software.
Once configured, the DVM will search for an authorized access point. When an
authorized access point is identified, the DVM will automatically connect and begin
uploading the event files to the back office FTP server. For more information see the
“VuVault® Wireless Server Setup Guide”
.
Mode
This selection determines whether the wireless function is enabled or disabled. When
enabled, the mirror will automatically connect to authorized Wi-Fi access points defined
in the
Data Transfer > Network > WTM Settings
and automatically upload event recordings
and files. To enable the wireless function, choose either
Basic
or
Advanced
. Choose
None
if you will not be using any wireless functions.
Basic
In Basic Wi-Fi mode, after the event files have been uploaded to the server the
DVM will delete the files from DVM’s primary memory storage. This mode provides
no extra file verification. This is the commonly used setting for most installations.
Advanced
In Advanced mode, the DVM will only delete the files from the DVM’s primary
memory after VuVault has imported and validated the files.
Secure Video Uploads
If enabled, the DVM will provide a proprietary encryption technique before uploading
to the back office through a Cell-Network or Public IP. To use this feature, the WTMLite
service MUST also be configured. WTMLite is needed to decrypt the file set after
the wireless transfer. Please refer to the
“VuVault Wireless Server Setup Guide”
for
instructions on how to install and configure WTMLite. Enabling this function may slow
the upload speed.
Settings: Enabled,
Disabled
[default]
