Digital Ally, Inc.
|
Device Configuration
3-6
DVM-800 Operation Guide
|
860-00186-00 Rev L
The following table can be used as a general guideline for determining the
Days in LPS
setting; actual results may vary:
Table 3-6:
Number of days a vehicle can remain in
Low Power Standby before draining the vehicle battery
Battery C20 Rating
(Ah)
No Additional or
Minimal Load (days)
Additional Load
(days)
45
6-8
3-5
80
10
7-10
100 and greater
10
10
Settings
Audio Mute
Choose to allow or not allow the DVM user to manually mute the audio while the DVM
is recording.
Settings: Disabled,
Enabled
[default]
Login Mode
Choose how the user will log into the DVM system. User device logins are configured in
the VuVault
Admin>Users
tab. Users may log in using their User Name or Device sign-on
ID. If set to none, no DVM login will be required (not recommended).
Settings: None, User ID;
User Name
[default]
Entry Timeout
Enter the number of seconds when LCD menu items time out from no user input. This
timer applies to the Main Menu and Profile screens. When the timer has expired, the
DVM will return to standby mode.
Settings: 0 to 600 seconds [default =
60 seconds
]
3.4 Profile
Choose whether the DVM user, at the end of each recorded
event, will be prompted to choose from the following list of
criteria. Profile entries will become part of the event metadata.
The menu will be displayed until the user enters relevant data or
the
Entry Timeout
expires.
Event ID’s are defined by an administrator in VuVault
®
back
office software. To configure this parameter, go to the
Admin >
Events
tab. If enabled, the DVM user will be prompted to choose
from a list of defined events at the completion of a video recording. See the
“VuVault
Administrator Guide”
to learn how to create or edit events.
Event Id Enable
Incident ID parameters are predetermined and can be enabled or disabled.
Settings: Enabled,
Disabled
[default]
Incident Enable
Incident ID parameters are predetermined and can be enabled or disabled.
Settings: Enabled,
Disabled
[default]
Ethnicity Profile
Ethnicity parameters are predetermined and can be enabled or disabled.
Settings: Enabled,
Disabled
[default]
