Digiplex DGP-319, Installer'S Manual

Page: 23 / 26

Digiplex Liberator 21
2) In each section there are eight digits available to program. Each digit
represents a button or a combination of buttons. Enter a hexadecimal value (0
to F) of the option you want from Table A on page 19. After every second digit
programmed, the keypad will emit beeps.
First digit: enter the choice for Button A
Second digit: enter the choice for Button B
(
BEEP
-
BEEP
-
BEEP
)
Third digit: enter the choice for Button C
Fourth digit: enter the choice for Button D
(
BEEP
-
BEEP
-
BEEP
)
Fifth digit: enter the choice for Buttons A+B
Sixth digit: enter the choice for Buttons C+D
(
BEEP
-
BEEP
-
BEEP
)
Seventh digit: enter the choice for Buttons A+C
Eighth digit:
enter the choice for Buttons B+D
(
BEEP
-
BEEP
-
BEEP
-
BEEP
-
BEEP
) Confirmation Beep
3) Press [
ENTER
] once the remote control is programmed. The keypad will
automatically switch to the next section for the next remote control.
Once you have programmed section [501] , the keypad will emit a Confirmation
Beep. The keypad will automatically switch to section [502] and so on. You can
verify the programming in each section by returning to the sections and pressing the
button. The numerical LEDs and the LEDs representing the hexadecimal
values will illuminate one at a time as you press the button.