Digiplex DGP-319, Installer'S Manual

Page: 13 / 26

Digiplex Liberator 11
These keys represent the hexadecimal values from A to F:
[STAY]
= A [ARM] = C [BYP] = E
[FORCE] = B [DISARM] = D [MEM] = F
For installations using the LED Keypads, the hexadecimal values will
illuminate the following LEDs:
(A) = [
STAY
] LED (C) = [A1] LED (E) = [
BYP
] LED
(B) = [
FORCE
] LED (D) = [A4] LED (F) = [
MEM
] LED
3.9 PGM D
EACTIVATION
E
VENT
SECTIONS
[006]
AND
[008]
When a PGM Activation Event occurs, the Receiver Module's on-board PGM will
deactivate when the events programmed in section
[006] (PGM 1) or section [008]
(PGM 2) occurs unless PGM Timed Mode is enabled. The PGM Deactivation Event
is programmed the same way as the PGM Activation Event (see section 3.8).
3.10 PGM O
VERRIDE
SECTION
[002]:
OPTIONS
[3]
AND
[7], [4]
AND
[8]
When the PGM Override is enabled in options [3] and/or [7], the Receiver Module
will ignore the PGM Mode, PGM Activation Events, PGM Deactivation Events, and
PGM Timers of the corresponding PGM(s). Options
[4] and [8] control whether each
PGM is activated or deactivated until the PGM Override is disabled.
From Step 6 in Figure 3.1, page 6, enable or disable the options:
Option
[3] OFF = PGM 1 Override disabled (default)
Option [3] ON = PGM 1 Override enabled
Option [4] OFF = PGM 1 deactivated (default)
Option [4] ON = PGM 1 activated
Option [7] OFF = PGM 2 Override disabled (default)
Option [7] ON = PGM 2 Override enabled
Option [8] OFF = PGM 2 deactivated (default)
Option [8] ON = PGM 2 activated