Digiplex Liberator 17
If you are unable to find the serial number, refer to section 3.12 of this
manual.
From Step 5 in Figure 3.1, page 6:
1) Enter a section from
[301]
to
[316]
2) Enter the serial number of the remote control
SECTIONS
[030]
AND
[031]
The number of remote controls assigned to the Receiver Module can be viewed in
sections
[030]
and
[031]
. The remote controls assigned in
[301]
to
[308]
will appear
in section
[030]
and the remote controls assigned in
[309]
to
[316]
will appear in
section
[031]
.
In section
[031]
remote controls assigned in
[309]
to
[316]
appear as 1
through 8. For example, the remote assigned in
[309]
would appear as 1 in
section
[031]
.
Remote controls can also be deleted through these sections. Use Feature Select
Programming (see section 3.1.1) to delete a remote control from the system by
pressing the corresponding key. For example, to delete the remote control assigned
in section
[309]
, press the
[1]
key in section
[031]
, and then press
[
ENTER
]
.
5.2 A
SSIGNING
R
EMOTE
C
ONTROLS
TO
U
SER
A
CCESS
C
ODES
SECTIONS
[401]
TO
[416]
Each remote control must be assigned to a
User Access Code
. All
User Access
Codes
are given a
User Number
from 001 to 096 (001 is the
System Master Code
).
Each section from
[401]
to
[416]
represents the remote control assigned to sections
[301]
to
[316]
(see section 5.1). For example, the remote assigned in section
[301]
will be assigned to the
User Access Code
designated in section
[401]
.
From Step 5 in Figure 3-1, page 6:
1) Enter a section from
[401]
to
[416]
2) Enter the
User Number
(001 to 096) to be assigned to the remote control.
Summary of Contents for DGP-319
