Digiplex DGP-319, Installer'S Manual

Page: 21 / 26

Digiplex Liberator 19
Table A: Button choice
The button choices [1] to [9] function only with control panel (DGP-48)
versions 2.12 or higher. In versions prior to 2.12, these button choices will
ONLY function with the System Master Code (Code 01).
These keys represent the hexadecimal values from A to F:
[STAY]
= A [ARM] = C [BYP] = E
[FORCE] = B [DISARM] = D [MEM] = F
For installations using the LED Keypads, the hexadecimal values will
illuminate the following LEDs:
(A) = [
STAY
] LED (C) = [A1] LED (E) = [
BYP
] LED
(B) = [
FORCE
] LED (D) = [A4] LED (F) = [
MEM
] LED
For explanations concerning the function of each of the Button choices, refer to their
respective sections in the
Digiplex Control Panel's Reference & Installation Manual .
For installations using LCD Keypads :
From Step 5 in Figure 3.1, page 6:
1) Enter a section from [501] to [516] depending on the remote control you want to
program. For example, program the buttons for the remote control assigned in
section
[301] in section [501] .
2) Place the underline under the digit of the button or button combination you
want to program (see Figure 5.2). Enter a hexadecimal value (0 to F) of the
option you want from Table A on page 19.
3) Return to Step 2 for each button or button combination for the remote control.
[0] = Not used [8] = Panic 2
[1] = Regular Arm [9] = Panic 3
[2] = Stay Arm [A] = Smoke reset
[3] = Instant Arm [B] = PGM Table: First Digit: 8, Second Digit: 0, Feature 1
[4] = Force Arm [C] = PGM Table: First Digit: 8, Second Digit: 0, Feature 2
[5] = Disarm [D] = PGM Table: First Digit: 8, Second Digit: 0, Feature 3
[6] = Stay/Instant Disarm [E] = PGM Table: First Digit: 8, Second Digit: 0, Feature 4
[7] = Panic 1 [F] = PGM Table: First Digit: 8, Second Digit: 0, Feature 5