Digiplex DGP-319, Installer'S Manual

Page: 22 / 26

20 Installer’s Guide
4) Press [
ENTER
] once the remote control is programmed. The LCD screen will
automatically switch to the next section for the next remote control.
For example: You have programmed section [501] for the remote control
assigned in section [301]. Press [enter]. Section [502] will appear on the screen
for you to program the remote control that is assigned in [302]
.
Figure 5.2: Button programming shown on LCD screen
In Figure 5.3 button A is programmed to Regular Arm, button B is programmed to
Disarm, and the combination of buttons A+B is programmed to activate the PGM(s)
according to
PGM Table, First Digit 8, Second Digit 0, Feature 4 . The other buttons
and their combinations are not programmed.
Figure 5.3: Programmed buttons on LCD screen
For installations using LED Keypads :
Completing the Programming Guide before beginning Button Programming
is suggested.
From Step 5 in Figure 3.1 on page 6:
1) Enter a section from [501] to [516] depending on the remote control you want to
program. For example, program the buttons for the remote control assigned in
section
[301] in section [501] .