Digiplex DGP-319, Installer'S Manual

Page: 17 / 26

Digiplex Liberator 15
section [201] is the viewer for the device in section [101] and section [216] is the
viewer for the device in section [116] .
From Step 5 in Figure 3.1, page 6, enter a section from [201] to [216] to view the
average strength of each device.
For installations using the LCD Keypads :
The signal strength is represented by one to ten characters that will appear on the
LCD screen below the words “Module Data”. The reading (number of characters) will
appear beside the characters.Three characters or less is a very weak signal and the
device should be moved. An average reading above four characters is acceptable.
For installation using the LED Keypads :
The signal strength is represented by the illumination of the numerical LEDs from
LED 1 to LED 10. A reading from LED 1 to LED 3 is a very weak signal and the
device should be moved. An average reading above LED 4 is acceptable.