75
NVR and hDVR Systems Setup Guide
APPENDIX E: CONFIGURING DIGIOP® AND BLACK BRAND IP CAMERA ADDRESS
E.3 Configuring the camera network settings
NOTE
In networks with a DHCP server, the IP camera will acquire dynamic (changeable) network settings when it is initially powered
on. These dynamic settings can easily be converted to static settings, or changed to other static settings that are also compatible
with your network.
1.
Connect your camera to the network, then power on the camera.
2.
Open the IPAdminTool directory on your computer, then double click the file
IPAdminTool.exe
to start the application.
When the IPAdmin Tool starts, it will discover all the IP devices it supports that exist on the network. The discovery process
may take a few minutes.
Check the list of IP devices found by IPAdmin Tool. You can identify your camera by its MAC address. If the camera was not
found, click the
Refresh
button every minute until your camera appears in the list.
3.
After finding the camera you are configuring, right click the entry, then select
IP Address
from the drop-down list. An IP
Setup window will open.
