37
NVR and hDVR Systems Setup Guide
SECTION 3: SYSTEM SETUP
In the DIGIOP DATA SERVER menu, you can rename the server, select a different Time Zone, and setup a User-defined Address. The
User-defined Address is useful for unique network situations only. Normally additional configurations, or a change in the network
configuration, is not needed. After changing any of these parameters, click
Save
. Click
Cancel
to close the window without saving.
NOTE
DO NOT DELETE the IP addresses determined by DIGIOP ELEMENTS™ listed on the DIGIOP Data Server screen. On the screen shown
above, these address are 192.168.75.11:24752 and 12.125.219.54:24752; they are likely to be different on your system.
Administrative actions allows allow for a download to, upload from, or execute (remote execute) commands on the system.
This feature is useful for system maintenance. To use this feature, click the
+ Create New Action
bar, then enter the required
parameters in the window.
3.13.1 Add data devices
Add data devices to the system through DIGIOP Control. Refer to the
DIGIOP Control V8.7 User Manual
for more information.
