manualshive.com logo in svg

Digiop AH Series, Systems Setup Manual

Share
Download
Digiop AH Series Systems Setup Manual Download Page 24

20

www.digiop.com

SECTION 3: SYSTEM SETUP

WARNING

!

 

Before powering on your server, make sure the power sources are grounded. This helps prevent personal injury or 
damage to the equipment.

1.  Before connecting the power, ensure that the power source configuration switch on the back of the computer (computer power 

supply) is set correctly. 

2.  Make sure all cables are securely attached.

1. 

Power on your NVR or hDVR and allow it to progress to the windows desktop display. 

NVR/hDVR server desktop display

2. 

Click the clock and date entry in the lower-right corner (system tray) of the desktop. Click 

Change Date and time 

settings..

, then use the accepted Windows 7 system procedure to configure your server with the local time and time zone. 

3. 

Use the accepted Windows 7 system procedure to configure the network settings of you NVR. 

4. 

Skip to the next subsection of this manual. 

3.9  Add cameras to the NVR/hDVR

IP cameras are added to the NVR/hDVR and configured through the DIGIOP® Control interface. The DIGIOP® Control interface can be 
opened through a web browser either in the NVR or hDVR, across the local LAN were the NVR or hDVR is installed, or from a PC on 
the Internet. To use advanced configuration features such as adding additional licenses, see the 

DIGIOP® Control V8.7 User Manual

. 

Summary of Contents for AH Series






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands