Digimerge DNR200 Series, Instruction Manual

Page: 45 / 122

35
Using the Main Menu
settings. By default, the following user groups
are configured on the system:
• admin: Accounts in the admin group are
system administrators. They have full
access to the system, may configure all
system settings, and can manage user
accounts.
• user: Accounts in the user group are
normal users. They have limited access to
system menus.
Adding Accounts
1. Click Add User .
2. Configure the following:
• User: Enter a user name for the account.
• Memo (Optional): Enter comments for the
account.
• Password: Enter a password for the
account. Repeat password under Confirm .
NOTE: User passwords must be 6
characters.
• Reusable: Check to enable multiple users
to connect using this account.
• Group: Select the group that the account
will be included in.
3. In the bottom portion of the screen, select
the permissions that will apply to the user.
By default the account will have all
permissions that are enabled for its group.
An account cannot have more permissions
than its group.
4. Click Save to save changes.
Modifying Accounts
Admin accounts may modify the user name,
password, and permissions of user accounts.
User accounts may modify their own
password.
To modify account settings:
1. Click the account in the list.
2. Click Modify User .
Click Modify User
3. Under User , select the account you would
like to modify.
4. Configure the account settings and
permissions as necessary and then click
Save .
To modify an account password:
1. Click Modify Password .
Click Modify Password