Digifly AIR-BT Owner'S Manual Download Page 66 | Manualshive

Page: 66 / 96

background image

AIR_Manual_506a_ENG_rev_1.pdf

Page 66/96

13.2

BLUETOOTH CONNECTION (AIR BT ONLY)



The communication possibilities offered by the fully functional Bluetooth System on the Digifly AIR BT are
extraordinary and practical! There are two major lines to use your Bluetooth:

1) Upload and download waypoints and tracklogs between your instrument and an external device using GPS
Dump Android version.

2) The second option, which really marks a difference and, once more, shows the quality of this instrument is
that the Digifly AIR BT has an integrated Digi-F

LY

B

OX

(Telemeter). This feature allows your Digifly AIR BT to send

its telemetry (data from its sensors: barometric altitude, GPS altitude, ground speed, IAS speed -with Pitot Tube
system-, variometer, GPS position, etc.), in the international NMEA format via Bluetooth or via USB cable, to
another device (E-Reader, Smartphone and Tablet) it has previously paired with, so that this data can be used
directly by specialized programs such as LK8000, XCSoar, XCTrack, Top Hat, GpsDump, TTLiveTrack24. This
information (Telemetry) can also be used to live track to any server using, for example, GPSDump or
TTLiveTrack24 on an Android Smartphone.

This means that the Digifly AIR BT is also a Telemeter and in Digifly we call this the Integrated Digi-FlyBox ; other
companies call this function an “Info Box / Data Source / Sensor Box”, but none of these will include an
anemometer (Pitot Tube System) like our instrument does.

13.2.1

BLUETOOTH “PAIRING”



The communication via Bluetooth between Digifly AIR-BT and an external device (Smartphone , Tablet and E-
Reader) is possible only after pairing the two devices, here is how to proceed:

1) On the AIR-BT, set the ADVANCED SETUP \ n. 26 BLUT parameter to "ON".
2) Enter the MENU page and go to "AirTools"
3) You will be prompted to choose whether to communicate via USB cable or via Bluetooth with the

message "Press OK to link USB, Press DOWN to link BT or Menu to exit", press the

key.

4) AIR-BT looks forward to the pairing request from the external device.
5) From the Bluetooth’s control panel of the external device, press the option "Search".
6) A list of available devices is created, select "Digifly Air nnn" (where “nnn” are the last three digits of your
instrument’s serial number).
7) When prompted, enter the pairing code of the AIR-BT which is "0000" and then confirm; if the procedure
is successful, the external device displays a message confirming that the Digifly AIR BT is paired.



Once the AIR has paired with a device, it is no longer necessary to repeat the pairing process.



In case of problems, press the

key on the AIR-BT to exit and try it again.

.

«
...
64
65
66
67
68
...
»

Summary of Contents for AIR-BT

































































































Reviews:

No comments

Related manuals for AIR-BT

Brand: Navisys Technology Pages: 3

Brand: Garmin Pages: 95

Brand: Garmin Pages: 26

Brand: PAJ GPS Pages: 3

Brand: Navman Pages: 68

ECHOMAP UHD2 5X

Brand: Garmin Pages: 10

Brand: Qstarz Pages: 3

Brand: Awetek Pages: 7

Brand: Icar Pages: 7

Brand: Navman Pages: 50

Brand: LX Navigation Pages: 4

HawkEye 7200A-BB2327

Brand: Blue Sky Network Pages: 27

Brand: BOX Telematics Pages: 37

Brand: XAiOX Pages: 13

Brand: Mictrack Pages: 9

Brand: Eagle Pages: 128

Brand: ADB Safegate Pages: 110

Brand: Orchid Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands