Digifly AIR-BT Owner'S Manual Download Page 25 | Manualshive

Page: 25 / 96

background image

AIR_Manual_506a_ENG_rev_1.pdf

Page 25/96

4

MAIN FUNCTIONS

4.1

ALTIMETERS



The Digifly AIR features 9 different altimeters: ALT 1, ALT 2, ALT 3, ALT QNE, ALT FL, ALT GPS,

ALT H1, ALT HA, and ALT AGL.

-

ALT 1 (A1) : Barometric altimeter

-

ALT 2 (A2) : A2 Altimeter

-

ALT 3 (A3) : Gain during the current thermal

-

ALT QNE (QE) : QNE Standard Pressure Altitude. Barometric height recorded in your tracklog.

-

ALT FL (FL) : Flight Level Height Barometric Altimeter referring to the standard pressure in flight levels
(hundreds of feet).

-

ALT GPS (AG) : GPS Altimeter

-

ALT H1 (H1) : Estimated height over the cylinder of the current WP

-

ALT HA (HA) : Estimated height relative to goal cylinder, line, etc.

-

ALT AGL (HG) : Height above ground level with map (

see

4.1.1 and 6.17.1)

4.1.1

AGL ALTIMETER



The AGL altimeter, shows the height above ground, (AGL = Above Ground Level).

To activate the AGL altimeter, you must have a microSD card with the *.dgm map files of the area you will be
flying -created using AirTools- in your Digifly and that the “Elevation Mode” parameter (MAIN SETUP \ n. 19
ELVM), is set to either 1, 2 or 3. A detailed description on how to create a map and how to set the map
parameters see section 6.17.1.

4.1.2

ALTIMETERS’ SETTINGS



Graphic Altimeter :

digital value of A1 altimeter is integrated with the graphic scrolling altimeter.

With a friendly scale and numeric indications every 500 mt/ft embedded into an angular graphic
view making the numbers more readable.

There is also a simple graduated scale for meters in the hundreds.

4.1.3

ALTIMETERS’ SETTINGS



Go to the “ALTIMETERS” menu and select which altimeter you want to adjust (A1 or A2).

Important: while the recorder is activated is not possible to adjust the A1 Altimeter.



Synchronizing the A1 Altimeter with the altitude provided by GPS data:

If the “A1-GPS sync.” is enabled, (MAIN SETUP \ n. 39 A1SY default= ON), you are not yet moving (in flight) and
have not manually set the A1 altimeter, this altimeter will automatically synchronize with the GPS data.

To manually synchronize the A1 altimeter with the altitude data from the GPS, press the

button. This may

only be done when the instrument has acquired GPS coverage, if you are not moving and if the A1SY
parameter is set to ON. Once the flight recorder has started, this synchronization is no longer possible.

«
...
23
24
25
26
27
...
»

Summary of Contents for AIR-BT

































































































Reviews:

No comments

Related manuals for AIR-BT

Brand: iDM Pages: 24

Brand: Mappy Pages: 40

RoadEZ Cars PT-REZ-UC-00-1410UET

Brand: S&T Pages: 16

Brand: Communica Pages: 21

Cyclo 500 series

Brand: Mio Pages: 32

Brand: Mictrack Pages: 9

Brand: Brunton Pages: 128

Brand: Garmin Pages: 91

Brand: Jivi Pages: 24

Brand: Agrident Pages: 45

Brand: Becker Pages: 149

Brand: uAvionix Pages: 25

Brand: XAiOX Pages: 13

SuperGuard EZT-VT07B

Brand: Yield Technology Pages: 9

Brand: Qstarz Pages: 41

Brand: Qstarz Pages: 45

Brand: Koden Pages: 8

Brand: Garmin Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands