AIR_Manual_506a_ENG_rev_1.pdf
Page 52/96
Start
radius
WP start
Waiting
side
Start OK
Start
radius
WP start
Waiting side
Start OK
9.5
MODIFY A WAYPOINT IN A ROUTE (PARAMETER CHANGE)
If you want a waypoint to be your "start waypoint/gate" its type must be changed (Type = SSS) and you may even
need to adjust : Radius, In/Out, Start Gate Time , Next Gate, N. Gates
Press the
,
keys to set the cursor on the desired waypoint’s line that you want to modify.
Press the
key to open the drop down menu containing the possible actions, then select “EDIT – VIEW” and
confirm with the
key.
You’ll see a page with all the Waypoint’s info, use the arrow keys
,
to navigate to the field you want to
modify and confirm with the
key (described in chapters 2.6.1 and 2.6.2).
The waypoint fields that are generally EDITED in a route are:
o
Altitude : altitude above sea level in meters
o
Radius : radius (in meters) of the turn point cylinder
o
In/Out : whether it is an “Entry” or “Exit” type waypoint.
o
Type (defines the waypoint’s functions) :
TO = Take Off
TP = TurnPoint
SSS = Start of Speed Section
ESS = End of Speed Section
GLN = Goal Line
GCY = Goal Cylinder
o
IF editing an “SSS” type, you need to edit the following:
Start Gate Time: time of the first start (hours:min)
Next Gate: time interval (in minutes) between start gates
N. Gates: total number of start gates
Press the
key to go back to the route’s page
ENTRY START GATE (IN):
EXIT START GATE (OUT):
