Digi IX20, User Manual

Page: 583 / 726

System administration Reset the device to factory defaults
IX20 User Guide 583
1. Log into the IX20 WebUI as a user with Admin access.
2. On the main menu, click System . Under Configuration , click Configuration Maintenance .
The Configuration Maintenance windows is displayed.
3. In the Erase configuration section, click ERASE .
4. Click CONFIRM .
5. After resetting the device:
a. Connect to the IX20 by using the serial port or by using an Ethernet cable to connect the
IX20 ETH2 port to your PC.
b. Log into the IX20:
User name : Use the default user name: admin .
Password : Use the unique password printed on the bottom label of the device (or the
printed label included in the package).
When you first log into the WebUI or the command line, you must change the password for
the
admin user. See Change the default password for the admin user for instructions.
Additionally, for Wi-Fi enabled models, when you first log into the WebUI or the command
line, you will be required the change the SSID and pre-shared key (password) for the
preconfigured Wi-Fi access point. See
Reset default SSID and pre-shared key for the
preconfigured Wi-Fi access point for instructions.
c. Reset the default password for the admin account. See Change the default password for
the admin user for further information.

Command line
1. Log into the IX20 command line as a user with Admin access.