Digi IX20, User Manual

Page: 197 / 726

Wi-Fi Configure a Wi-Fi client and add client networks
IX20 User Guide 197
3. To view information about both active and inactive access points, include the all parameter:
> show wifi ap all
AP Enabled Status SSID BSSID
-------- ------- ------ ------------- -----------------
my_AP true up my_SSID 01:41:D1:14:36:37
digi_ap true up Digi2 00:40:D0:13:35:36
digi_ap2 false down
>
Show detailed status and statistics of a specific Wi-Fi access point
To show a detailed status and statistics of a Wi-Fi access point, use the show wifi ap name name
command.
1. Log into the IX20 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. At the Admin CLI prompt, type show wifi ap name name :
> show wifi ap name my_AP
Enabled : true
Status : up
SSID : my_AP
Security : none
Channel :
Channel Width :
Radio : wifi
BSSID : 01:41:D1:14:36:37
Client Signal RX TX Uptime
----------------- ------ ------ ------ ------
cc:c0:78:34:d5:a2 -68 260997 279481 801
>
Configure a Wi-Fi client and add client networks
Required configuration items
n
Create the Wi-Fi client.
n
The IX20 device's Wi-Fi radio that the Wi-Fi client will use.
n
The Wi-Fi network that the client will log into:
l
SSID of the Wi-Fi network's access point.
l
Type of security, and user name and/or password if applicable, used by the access point.