Routing
Virtual Router Redundancy Protocol (VRRP)
IX20 User Guide
247
i. Click to expand
IPv4
>
SureLink
.
ii. Click
Enable
.
iii. For
Interval
, type a the amount of time to wait between connectivity tests. To
guarantee seamless internet access for VRRP+ purposes, SureLink tests should occur
more often than the default of 15 minutes.
Allowed values are any number of weeks, days, hours, minutes, or seconds, and take
the format
number
{
w|d|h|m|s
}. For example, to set
Interval
to five seconds, enter
5s
.
iv. Click to expand
Test targets
>
Test target
.
v. Configure the test target. For example, to configure SureLink to verify internet
connectivity on the LAN by pinging my.devicecloud.com:
i. For
Test Type
, select
Ping test
.
ii. For
Ping host
, type
my.devicecloud.com
.
11. Click
Apply
to save the configuration and apply the change.
Command line
1. Log into the IX20 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
admin
to access the Admin CLI.
2. At the command line, type
config
to enter configuration mode:
> config
(config)>
3. Create a new VRRP instance, or edit an existing one. See
for information
about creating a new VRRP instance.
4. Enable VRRP+:
(config)> network vrrp VRRP_test vrrp_plus enable true
(config)>
