Command line interface
Auto-complete commands and parameters
IX20 User Guide
676
>
Display help for individual commands
When included with a command name, both
?
and
help
provide further information about the
command. For example:
1. To display further information about the
show
command, type either
show ?
or
show help
:
> show ?
Commands
--------------------------------------------------------------------------
arp
Show ARP tables
cloud
Show drm statistics
config
Show config deltas.
dhcp-lease
Show DHCP leases.
event
Show event list
ipsec
Show IPsec statistics.
log
Show syslog.
manufacture
Show manufacturer information.
modem
Show modem statistics.
network
Show network interface statistics.
openvpn
Show OpenVPN statistics.
route
Show IP routing information.
serial
Show serial statistics.
system
Show system statistics.
version
Show firmware version.
> show
Use the Tab key or the space bar to display abbreviated help
When executed from the root command prompt, pressing the
Tab
key or the space bar displays an
abbreviated list of available commands:
Similar behavior is available with any command name:
> config network interface
<space>
..
...
defaultip
defaultlinklocal lan
loopback
> config network interface
Auto-complete commands and parameters
When entering a command and parameter, press the
Tab
key to cause the command line interface to
auto-complete as much of the command and parameter as possible. Typing the space bar has similar
behavior. If multiple commands are available that will match the entered text, auto-complete is not
performed and the available commands are displayed instead.
Auto-complete applies to these command elements only :
