Digi IX20 User Manual Download Page 522

Page: 522 / 726

User authentication

LDAP

IX20 User Guide

522

1. Log into the IX20 command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an

Access selection

menu

. Type

admin

to access the Admin CLI.

2. At the command line, type

config

to enter configuration mode:

> config
(config)>

3. (Optional) Prevent other authentication methods from being used if LDAP authentication fails.

Other authentication methods will only be used if the LDAP server is unavailable.

(config)> auth authoritative true
(config)>

4. Set the type of TLS connection used by the LDAP server:

(config)> auth ldap tls

value

(config)>

where

value

is one of:

off

: Uses a non-secure TCP connection on the LDAP standard port, 389.

: Uses an SSL/TLS encrypted connection on port 636.

start_tls

: Makes a non-secure TCP connection to the LDAP server on port 389, then

sends a request to upgrade the connection to a secure TLS connection. This is the
preferred method for LDAP.

The default is

off

5. If

tls

is set to

start_tls

, configure whether to verify the server certificate:

(config)> auth ldap verify_server_cert

value

(config)>

where

value

is either:

true

: Verifies the server certificate with a known Certificate Authority.

false

: Does not verify the certificate. Use this option if the server is using a self-signed

certificate.

The default is

true

6. Set the distinguished name (DN) that is used to bind to the LDAP server and search for users.

Leave this option unset if the server allows anonymous connections.

(config)> auth ldap bind_dn

dn_value

(config)>

For example:

(config)> auth ldap bind_dn cn=user,dc=example,dc=com
(config)>

7. Set the password used to log into the LDAP server. Leave this option unset if the server allows

anonymous connections.

Summary of Contents for IX20























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IX20

Reviews:

Brands by name

Popular brands

Digi IX20, User Manual

Search results

Summary of Contents for IX20

Reviews:

Brands by name

Popular brands