System administration
Schedule system maintenance tasks
IX20 User Guide
597
n
To log script errors to the system log:
(config system schedule script 0)> syslog_stderr true
(config system schedule script 0)>
If
syslog_stdout
and
syslog_stderr
are not enabled, only the script's exit code is written
to the system log.
f. Set the maximum amount of memory available to be used by the script and its
subprocesses:
(config system schedule script 0)> max_memory
value
(config system schedule script 0)>
where
value
uses the syntax
number
{
b
|
bytes
|
KB
|
k
|
MB
|
MB
|
M
|
GB
|
G
|
TB
|
T
}.
g. To run the script only once at the specified time:
(config system schedule script 0)> once true
(config system schedule script 0)>
If
once
is enabled, rebooting the device will cause the script to run again. The only way to
re-run the script is to:
n
Remove the script from the device and add it again.
n
Make a change to the script.
n
Disable
once
.
h.
Sandbox
is enabled by default. This option protects the script from accidentally destroying
the system it is running on.
(config system schedule script 0)> sandbox true
(config system schedule script 0)>
5. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
6. Type
exit
to exit the Admin CLI.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
quit
to disconnect from the device.
