Diehl Metering SCYLAR INT 8, Installation And User Manual

Page: 52 / 71

Seite 52 von
71
The loop settings can be programmed to suit customer-specific requirements using the
IZAR@Mobile2 software.
The pushbutton is used to switch through the various displays. The button can be pressed for a short
or long time.
The following table shows the possible uses of the button:
Action Result
Short press => ▼
(< 3 seconds) Switches to the next display within a loop
Long press
(> 3 seconds) Switches to the next display loop
Button not pressed for 4 minutes Calculator switches off the display automatically (to save
power, but only if no error exists)
Button pressed again Calculator shows the basic display